info@foundry-mach.com
Closed cooling tower:
| Model |
Cooling capacity：Kcal/h |
Work pressure：Nipa |
Flux：m³/h |
In/Out Pipe Diameter：mm |
Fan power：Kw |
Water pump power: Kw |
| HL-100 | 31100 | 0.15 | 6 | DN65 | 0.55 | 1.5 |
|
HL-160 |
48160 | 0.15 | 10 |
DN65 |
0.75 | 2.2 |
|
HL-250 |
75250 | 0.2 | 12 |
DN65 |
1.1 | 3.0 |
|
HL-350 |
105000 | 0.2 | 12 |
DN65 |
1.1 | 3.0 |
|
HL-500 |
150500 | 0.25 | 20 |
DN80 |
1.5 | 4.0 |
|
HL-600 |
180600 | 0.25 | 22 |
DN80 |
2.2 | 4.0 |
|
HL-750 |
228000 | 0.3 | 25 |
DN100 |
2.2 | 5.5 |
|
HL-1000 |
301000 | 0.35 | 30 |
DN125 |
3.0 | 7.5 |
|
HL-1250 |
352000 |
0.35 |
40 |
DN125 |
3.0 | 11 |
|
HL-1500 |
451500 |
0.35 |
50 |
DN125 |
4.4 | 15 |
|
HL-2000 |
602000 |
0.35 |
70 |
DN150 |
6.0 | 18.5 |
|
HL-2500 |
752500 |
0.35 |
70 |
DN150 |
6.6 | 18.5 |
|
HL-3000 |
903000 |
0.5 |
100 |
DN150 |
9.0 | 30 |
|
HL-3500 |
1053000 | 0.6 | 120 |
DN150 |
9.0 | 37 |
|
HL-4000 |
1204000 |
0.6 |
160 |
DN200 |
12 | 45 |
|
HL-5000 |
1505000 |
0.6 |
180 |
DN200 |
15 | 55 |
|
HL-6000 |
1806000 |
0.6 |
200 |
DN200 |
15 | 75 |
1. Adopting distilled water as coolant, no contact with air, so that the water does not deteriorate, no scaling.
2. There is no need to build a pool, the pipe is clean, no scaling, to maintain the best cooling state in the pipe.
3. The spray system is equipped with water collector, water collection, fog collection, reduce water loss.
4. Adopting the special low-speed and low-power motor for cooling tower, the motor adopts the straight shaft type and gear speed change of the fully enclosed moisture-proof vertical motor.
5. Convenient installation, small footprint, short installation distance.
About us:
Foundry-Mach.com
China most professional Foundry Machinery platform
Let the foundry achieve
Everything you need under one roof
